ropimex Chemicals Animation - Bacoban@ a multifunctional disinfectant on the basis of chemical nano-technology Disinfection with residual effect

Bacoban®

Disinfection with residual effect

Conventional disinfectants are effective immediately – but only for a short period. The nano-sponge formed by Bacoban® passes on anti-microbial components for up to 10 days.

Bacoban®AB Ready-to-use disinfection for alcohol-resistant surfaces

Bacoban®DL
Alcohol-free Surface Disinfection
and Cleaning

Bacoban®WB
Alcohol-free
and Cleaning

Dexan® Hand disinfection
Bacoban® Nepuliser Surface disinfection
Pedexan® Shoe Disinfection
Bacoban®DL 3% Alcohol-free Surface Disinfection Surface disinfection with nebuliser
 

Bacoban® Desinfektion mit nachhaltiger Wirkung

Herkömmliche Desinfektionsmittel sind nur von kurzer Dauer wirksam. Mikroorganismen werden nur während der wenige Minuten dauernden Einwirkzeit abgetötet. Bis zur nächsten Desinfektion entsteht eine Hygienelücke, in der es wieder zu einer Neubesiedlung durch Mikroorganismen kommen kann.

Die nachhaltige Wirkung von Bacoban® schließt die Hygienelücke.
Der durch Bacoban® gebildete Sol-Gel-Schwamm gibt bis zu 10 Tage antimikrobielle Komponenten ab.

ropimex Chemicals - Übersicht der Gebinde

Bacoban® etabliert einen sehr dünnen Film (1) mit nachhaltiger Wirkung auf der Oberfläche (2). Die Technik hierfür ist der Sol-Gel-Prozess, der mittels eines flüssigen Sol-Zustandes eine feste Gel-Phase ausbildet. Die zur Keimabtötung verwendeten Biozide werden in die Porosität des sich ausbildenden Sol-Gel-Schwammes eingelagert und bei Kontakt mit Wasser (Bakterien, behüllte Viren, Pilze tragen immer eine Wasserhülle mit sich) ausgelaugt.

Bacoban® disinfection with a lasting effect

Conventional disinfectants are effective immediately – but only for a short period. Microorganisms are only killed during the few minutes of exposure. Until the next disinfection, there is a hygiene gap in which microorganisms can colonize again.

Bacoban® with residual effect close the hygiene gap.
The nano-sponge formed by Bacoban® passes on anti-microbial components for up to 10 days

ropimex Chemicals - Overview of the containers

Bacoban® establishes a very thin film (1) with a lasting effect on the surface (2). The technology for this is the sol-gel process, which forms a solid gel phase by means of a liquid sol state. The biocides used to kill germs are stored in the porosity of the sol-gel sponge that forms and are leached out on contact with water (bacteria, enveloped viruses, fungi always carry a water shell with them).